Dallas Concrete Pros.
CALL US NOW: (214) 256-1980

Concrete Repair Dallas

Concrete Repair Dallas

Why concrete sinks in the first place

Fill dirt is usually put along side of home and garage foundations after the structure work is finished. The fill dirt will help to fill the void created throughout the foundation of the building. Very rarely does a home builder put in the time to compact this dirt.

Soils consist of strong particles and the areas (spaces) in between these particles. Nevertheless, space areas in the ground can trigger huge issues for buildings and concrete pieces. Concentrated loads, such as structures or slabs can squeeze air and water from soils.
When this occurs, the soil sinks and the structures or slabs follow closely behind.

Selecting the Correct Method for Concrete Structure Repair work
Before deciding on a replacement approach, you need to identify exactly what is triggering the distress. Analyze moldings and trim boards, mortar joints in brick veneer, and windows in low areas for ideas. Also, keep in mind of recent weather. Abnormally dry or wet weather can cause issues in the underlying soil.

Apply for the Mortar Repair work

Use mortar repair work in a caulking tube to fill out the little fractures, using calk to help out with the smaller fractures helps to increase the overall appearance of the finished work. The suggestion of the caulking tube will smooth the mortar repair a bit; you can do the remainder of the smoothing with your finger.

Mix the Spot Product

To repair larger cracks or holes, make a batch of the concrete patch, which you can purchase in little bags at a home or hardware store. Mix it inning accordance with the producer's directions.

Spot the Larger Holes

Utilizing a pointing trowel, push concrete spot into the holes and "build" missing out on sectors of concrete, and then smooth the concrete spot out. Remember, even if the edges aren't ideal, fixing the cracks before they get out of hand is the method to go. If you're operating at the edge of a swimming pool, hold the container of concrete repair work below the location you're dealing with, capturing any concrete patch you might spill around before it falls into the swimming pool.

Clean the Damaged Area

To prep, a small fracture washes it out with water and permit it to dry completely. Likewise, use a steel scrub brush to knock any loose particles far from the crack. If there is any loose pebbles or particles in the crack or hole use a shop vacuum to eliminate them before they become an issue later.

Seal the Spot

After the patch has a cured use concrete sealant to prevent water from entering the patch and harming the same area again. When you seal the concrete, it will help to extend the life of the work that you have just spent all this time repairing. The most commonly utilized method of correcting smaller sized slabs of sunken concrete, such as property slabs, driveways, pathways, swimming pool decks, etc. is slab jacking.

Slabjacking is performed by pumping a cement grout through small, strategically located holes in the concrete piece. When in place, the grout helps to firm up the concrete, therefore strengthening the bond that is created. When slab jacking has combined and hardened it then contributes to strengthening the home slab, therefore slab jacking further increasing the strength of the new bond.

If you choose to use a solid cement that is complemented with a lime grout, then the lime portion of the mixture will help to stabilize the base of the new structure. This combination helps to bring the new slab to much more supported configuration and helps to reduce the chance that the slab will deteriorate back to the unstable place.

If close attention is paid then many of these issues can be avoided from the start of the project. Instead of a building taking the cheap route of using free fill dirt to fill in a foundation, they should spend a little extra money and use a mixture of sand and gravel to use as a home foundation. Typically a mix of sand and gravel with dirt will compact down and give a much more stable home foundation. This same mixture is also recommended to be used with sidewalks and driveways as well.

Correct compaction will get rid of air spaces, which if not removed, will, later on, settle and trigger the concrete to break and sink.
For larger issues, specifically those discovered in the house and industrial building foundation shifting, piercing is utilized to lift and stabilize the structure.

Piering involves using tactically positioned mechanical jacks to lift the settled beam to grade. The beam should be raised thoroughly to prevent more or unnecessary damage. When working on the pier and beam if the beam is raised up to a height that is unique to the building that we need to raise the beam to then the leveling will happen much more efficiently. The footing should be set deep enough so that the footing will act independently of any settling that they house may have in the future. With the proper placement of the pier and beam then the weight is adequately applied to all the necessary areas as to spread out the weight that the house may shift in time. The pier is then connected in the house footer with steel which then further helps to support the beam structure.

Concrete Repair Dallas
Dallas Concrete Company
214-256-1980
1303 Pagosa Pl, Carrollton, TX 75007

View Larger Map